Speedway Motors Hotrod Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford

Description

Designed for a clean and simple install, 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups, Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad, Brake lever can easily be modified for driver comfort, Intended for use with an automatic transmission
Master Cylinder/Pedal Assembly for Model T, A, 1932 Ford
Sku # 91631926
Mfr. Part # 91631926
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Notes
Brake System Builder's Tip (Link)
Info
Designed for a clean and simple install onto Model T, Model A, and 1932 Ford frame. The included 1" bore remanufactured master cylinder is suitable for 4-wheel disc or disc/drum brake setups. The outlet ports are 3/8"-24 IFF. The bracket can be bolted or welded to the left frame rail (boxed or stock).
Kit includes a dual feed master cylinder, frame bracket, and a steel pedal arm w/ pad that can be easily modified for driver comfort.
Note:
Will NOT work in conjunction with the factory clutch pedal. Intended for use with an Automatic Transmission.
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.
Item Details
Fits Model T, Model A, and 1932 frames.
Specs
Both fluid outlets are 3/8" -24 Inverted flare female.
Overall Height of Pedal:  11" (from the center of the pivot)
Pedal Ratio:  6:1
Frame bracket is 4" front-to-back, 4-1/2" tall, and 3-1/4" from top of bracket down to centerline of master cyl. mount
From where master cylinder bolts to the bracket to the end of the master cylinder is 7”
Master Cylinder Overall Height:  5”
From the mounting holes to the top is 4-1/4”
Application
This Part Fits
Pedal can be modified by cutting the depth of the pedal arm, or by bending the arm in an L shape to stagger the pedal. The pedal pad screws into a bung, which must be welded to the pedal assembly once you have determined exactly how you want it configured.
Charts
(PDF)
Specs
Sold in Quantity
Kit
Outlet Count
Tandem
Reservoir Type
Integral
Notes
Includes master cylinder and pedal with pad.
Outlet Fitting
3/8"-24 IFF
Balance Bar
No
Centerline of Holes
3.25
Brake Booster Included
No
Brake System Type
Disc/Drum
Position
Frame
Master Cylinder Mount Type
Reverse
Master Cylinder Count
1
Pedals Included
Brake
MFG. Part #
91631926
Master Cylinder Bore Size
1 Inch
Pedal Length
11
Reviews
Product worked great in my application
Rated
by Bubba on June 25, 2021
Summary:
Works great, great quality
Yes, I recommend this product.
Building 1928-29 model A rat rod
Rated
by Fast John on April 13, 2021
Summary:
Inside Z Frame on 28=29 Model A pickup, fit as described.
Yes, I recommend this product.
I will be buying more
Rated
by Crazy man's wife on February 06, 2021
Summary:
Easy assembly no break light switch
Yes, I recommend this product.
Great product great price
Rated
by jeff on October 07, 2020
Summary:
good quality nice piece
Yes, I recommend this product.
Yes good product
Rated
by jeff on October 07, 2020
Summary:
nice piece
Yes, I recommend this product.
Related Items / Suggested Parts
Speedway Brake Pedal Foot Pad, Round, Stainless Steel
IFM to IFF Adapters
Universal T-Bucket Brake Pedal Kit
Lokar SPO-6071 Chrome Round Steel Brake/Clutch Pedal Pad with Rubber
Steel -3 AN to 3/8-24 IFM Inverted Flare Adapter Fitting
Chrome Master Cylinder Cover
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.